Inhibition of Steel Corrosion in Nitric Acid by Sulfur Containing Compounds
Abstract
The inhibitive mechanism, thermodynamics, and adsorptive properties of ThioBarbituric
Acid (TBA) and Thiourea (TU) on the corrosion of mild steel in 0.5 M HNO3 solution have
been investigated using potentiodynamic, electrochemical impedance spectroscopy
techniques, and quantum chemical calculations. Both inhibitors showed good inhibition
efficiency in nitric acid solution. TU was the most effective inhibitor and its inhibition
efficiency increases with increasing concentration to attain 99% at 6 × 10−3 mol · L−1
at 30°C. Theoretical fitting of different isotherms, Langmuir, Flory–Huggins, Temkin,
and the kinetic-thermodynamic models were tested to clarify the nature of inhibitors
adsorption on mild steel surface. The obtained experimental data fitted all the applied
adsorption isotherms except Langmuir. The thermodynamic activation parameters were
determined to provide evidence of the inhibitory effect of TBA and TU. To determine the
surface charge at the steel surface in nitric acid solution the potential of zero charge
was measured using AC measurements at different potentials. Quantum chemical
parameters were calculated and explained. The data clarified that the inhibition of steel
in nitric acid by TU or TBA takes place through physicochemical adsorption mechanism.
Author(s)
Rahal H., Abdel Gaber A., Younes G.
Journal/Conference Information
Chemical Engineering Communications ,203(4): 435-445