• Experimental and Numerical Investigation on the Behavior of Reinforced Concrete Walls Strengthened by Steel Members

• Behavior of Concrete Mixes Using Recycled Aggregate Confined with Steel Sections

• Behavior of Externally Reinforced Post-Tensioned Shear Walls under Lateral Loads

• An Experimental Study on the Effect of Salt and Sugar Combination on Mortar Properties

• Effect of Phragmites Australis Ash (PAA) on the Mass of Mortar Exposed to Dimensional Stability Study

• Properties of mortar containing Phragmites Australis Ash

• Length change of mortar containing Phragmites Australis Ash (PAA)

• Correlation Between Length Change and Mechanical Properties of Mortar Containing Phragmites Australis Ash (PAA)

• Methods and Surface Materials Repair for Concrete Structures – A Review

• An Experimental Study on the Total and Capillary Water Absorption of Mortar Containing Phragmites Australis Ash

• Mechanical and Durability Properties of Geopolymer Concrete–A Review

• Volume Stability and Mechanical Properties of Cement Paste Containing Natural Fibers from Phragmites-Australis Plant at Elevated Temperature.

• Effect of Plant-based natural fibers on the mechanical properties and volume change of cement paste

• Effect of Adding Phragmites-Australis Fiber on the Mechanical Properties and Volume Stability of Mortar

• A Review on Chemical and Autogenous Shrinkage of Cementitious Systems

• Chemical shrinkage, autogenous shrinkage, drying shrinkage, and expansion stability of interfacial transition zone material using alkali-treated banana fiber for concrete

• Refractory Concrete Properties—A Review

• Effect of Incorporating Cement and Olive Waste Ash on the Mechanical Properties of Rammed Earth Block

• Advance upcycling of By-products in Binder and Binder based materials

• Sustainable concrete Materials and Structures

• Relationships between Mortar Spread and the Fresh Properties of SCCContaining Local Metakaolin

• Sustainability of Natural Resources

• Uncertainty analysis for the dynamic modulus of recycled asphalt mixtures using unclassified fractionated RAP materials

• Effect of different activation techniques on the engineering properties of cement-free binder containing volcanic ash and calcium carbide residue

• Effect of Mix design parameters on the properties of cementitious composites incorporating volcanic ash and dune sand

• Rheological, mechanical and durability performance of some North African commercial binary and ternary cements

• Volume Stability of Pervious Concrete Pavement Containing Municipal, Solid Waste Incineration Bottom Ash

• Accelerated carbonation curing of concrete incorporating calcium carbide residue

• Synergetic impact of volcanic ash and calcium carbide residue on the properties and microstructure of cementitious composites

• Physical, Mechanical and Transfer Properties at the Steel-Concrete Interface: A Review

• Effect of Elevated Temperatures on the Mechanical Properties of Metakaolin-based Geopolymer Mortars

• Investigation of the Bond Strength of Metakaolin-based Geopolymer Mortar as a Repair Material

• Multi-criteria optimization of SBR-modified mortar incorporating polyethylene terephthalate waste

• Effect of Elevated Temperatures on Compressive Strength, Ultrasonic Pulse Velocity, and Transfer Properties of Metakaolin-Based Geopolymer Mortars

• Assessment of interfacial mortar-mortar bond and pure shear strength of metakaolin-based geopolymer

• Investigation of Drying shrinkage, Water Absorption and Strength Properties of Metakaolin Based Geopolymer Mortars

• Investigation of the Density, Ultrasonic Pulse Velocity and Strength Properties of Metakaolin Based Geopolymer Mortars

• Assessment of Soil–Structure Interaction Effects on the Beirut Port Silos Due to the 4 August 2020 Explosion: A Coupled Eulerian–Lagrangian Approach.

• The stabilization of clayey soil by using sawdust and sawdust ash

• Using fly ash-plastic mesh bags wastes mixture as a recoverable resource for soil stabilization

• Groundwater Recharge Potential and Identifying Suitable Aquifer Recharge Techniques in the Bekaa Plain, Lebanon

• Preliminary Water Quality Assessment Using Canadian Water Quality Index of Ras El-Ain Ponds, South Lebanon

• A Strategic Framework for Attaining Golden LEED Certification for Resorts

• Unveiling novel APLIS model for identifying groundwater recharge zones in semi-arid regions: A case from Lebanon

• Restoration of Qaraoun Lake aquatic life based on wetland treatment concept

• Building a (BCI) Electroencephalogram (EEG) Signals’ Classification

• Enhanced Performance of Intensity Modulation with Direct Detection Using Golay Encoded Nyquist Pulses and Electronic Dispersion Compensation

• Hexagonal Patch Antenna for Ultra Wide Band Applications

• A Compact UWB antenna with Dual-Reject Band

• Logic-Based Neural Network for Image Compression Applications

• Automatic Radial Routing Protocol for Public Transport System

• Machine Unlearning, A Comparative Analysis

• ResNet-Based Detection of SYN Flood DDoS Attacks

• Compensating voltage waveform distortions using a practical topology of series active power filters

• Compensating voltage waveform distortions using a practical topology of series active power filters

• A Power Electronic Controller Based Algorithm for Output Power Prediction of a PV Panel

• SVPWM Inverters for Photovoltaic Systems Applications

• A Three-Phase Multilevel Inverter Synthesized with 31 Levels and Optimal Gating Angles Based on the GA and GWO to Supply a Three-Phase Induction Motor

• Legacy Versus Algebraic Machine Learning: A Comparative Study

• High Performance and Lightweight Single Semi-Lattice Algebraic Machine Learning

• Enhanced CPU Design for SDN Controller

• A Secure and Resilient Smart Energy Meter HUSSAM A.

• Early Diagnosis of Osteoporosis: An Artificial Intelligence-Based Framework

• Advancing Breast Cancer Diagnosis through Breast Mass Images, Machine Learning, and Regression Models

• Innovative Model-Free Onboard Diagnostics for Diesel Particulate Filter

• Trapped mass estimation in automotive diesel engines based on in-cylinder pressure signal projection

• Thermo-Economic Comparison of Solar Thermal Cooling and Solar Photovoltaic Cooling Systems for a Typical Residential Building – Lebanese Case Study

• Geothermal Energy Concept Applied to All-Air HVAC System

• Control of a Novel Parallel Mechanism for the Stabilization of Unmanned Aerial Vehicles

• A Numerical Investigation into the Effect of Altering Compression Ratio, Injection Timing, and Injection Duration on the Performance of a Diesel Engine Fuelled with Diesel–Biodiesel–Butanol Blend

• A Numerical Investigation on Enhancing the Performance of a Diesel Engine Fuelled with Diesel-Biodiesel Blend Using Diethyl Ether as an Additive

• Computational Simulation and Analysis of Local Thermal Comfort and Indoor Air Quality in Space with Displacement Ventilation

• Prediction of an Efficient Energy-Consumption Model for Existing Residential Buildings in Lebanon Using an Artificial Neural Network as a Digital Twin in the Era of Climate Change

• Dynamic Response Of Steel Concrete Beams With Partial Interaction Due To Moving Loads

• Characterization and optimization of mechanical properties in design materials using convolutional neural networks and particle swarm optimization

• Evaluation and prediction of design-time product structural analysis assistance using XGBoost and Grey Wolf Optimizer

• Waste Heat recovery in Injection Molding Machines

• A review on Aero-Acoustics and Heat Transfer in Impinging Jets

• CFD study of prism-shaped vortex generators' impact within a coaxial heat exchanger

• Aeroacoustic Coupling in Rectangular Deep Cavities: Passive Control and Flow Dynamics

• Turbulent flow and heat transfer characteristics of resonant impinging jets. State of the Art Review

• Online Condition Monitoring of a Vacuum Process Based on Adaptive Notch Filters

• Interaction of a rectangular jet with a slotted plate in presence of a control mechanism: Experimental study of the aeroacoustic field

• Data-driven modeling using convolutional neural network for experimental velocity fields of an impinging jet

• Variable speed induction motors’ fault detection based on transient motor current signatures analysis: A review

• Effect of a Control Mechanism on the Interaction between a Rectangular Jet and a Slotted Plate: Experimental Study of the Aeroacoustic Field

• Control of a rectangular impinging jet: Experimental investigation of the flow dynamics and the acoustic field

• Experimental investigation of the Aero-Acoustics of a rectangular jet impinging a slotted plate for different flow regimes

• Improved Flow Regime Identification and Novel Scaling Approach to Construct Type Wells for Multiply-Fractured Horizontal Wells

• Identifying Flow Regimes Improves Arps Decline Curve Analysis