Ahmad Abdel Naby

Ahmad Abdel Naby
Faculty: EngineeringDepartment: Mechanical EngineeringPosition: Associate ProfessorOffice Number: F118Phone: 07 98 58 58Ext: 3437E-mail: a.abdelnaby@bau.edu.lb

Biography

Was born in Alexandria, Egypt on November 22th 1958 . He received his B.S. 1982 Mechanical Engineering Alex. University and and was ranked as a second over 200 students. M.S degree in Mechanical Engineering 1987 Alex. University, Egypt and PhD degree in Mechanical Engineering, Alex. University, Egypt 1995. He has been an Assistant professor at Department of Mechanical Engineering in Alex. University, Egypt, and from 2011 up to now, he has been promoted as associate professor at Department of Mechanical Engineering in Beirut Arab University, BAU, Beirut, Lebanon. His major is Mechanical Engineering His research interests cover fluid mechanics and hydraulic machines.

Teaching

Research

  • Fluid Mechanics & Hydraulic Machines.
  • Fluid Flow Measurements.
  • Pump Technology.
  • Renewable Energy.
  • Energy Saving.
  • Tribology, ” Friction, wear and lubrication “
  • Environmental Pollution and Control.
  • Oil Spill Recovery.
  • Waste Water Treatment.
  • Water Desalination.

Academic experience

  • Beirut Arab University, Lebanon, Associate Professor, 2011- present, full time.
  • Alexandria University, Egypt, Assistant Professor, 2008-2010, full time.
  • Beirut Arab University, Lebanon, Assistant Professor, 2005-2007, full time.
  • Alexandria University, Egypt, Assistant Professor, 2004-2005, full time.
  • Garyounis University, Benghazei, Libya., Assistant Professor, 2003-2004, full time.
  • Alexandria University, Egypt, Assistant Professor, 1995-2003, full time.
  • Alexandria University, Egypt, Research Assistant, 1987-1995, full time.
  • Alexandria University, Egypt, Assistant Lecturer , 1982-1986, full time.
  • Arab Academy for Science and Technology and Marine Transport, Alexandria, Egypt, Assistant Professor, 1998-2010, part time.
  • Pharos University, Alexandria, Egypt, Assistant Professor, 2010, part time.
  • Petro-Chemical and Gas Industries, Special Programs, Alexandria University Faculty of Eng., Assistant Professor, 2008-2009, part time.
  • Electro-Mechanical Eng, Special Programs, Alexandria University Faculty of Eng., Assistant Professor, 2008-2009, part time.

Non Academic Experience – ( Field Experience)

  • Consultation.
  • Design.
  • Supervision.
  • Training Programs & Short Courses for Engineers and Technicians.
    • Pipeline and pipe net works:
      • Petroleum products pipeline transmission.
      • Domestic water supply.
      • Firefighting.
      • Irrigation system (drip + sprinkler )
      • Deep wells "Dewatering systems "
      • Well point systems " Dewatering "
      • Chilled water systems "Central Air Conditioning Systems "
    • Pumping stations :
      • Petroleum Products.
      • Domestic water.
      • Boosters.
      • Irrigation.
      • Firefighting.
      • Chilled water systems.
      • Water treatment.
      • Waste water treatment.
      • R.O desalination plants.
    • Swimming pools and spas.
    • Water action and Parks.
    • Water falls.
    • Fountains.
    • Water and sewage treatment plants
    • R.O. desalination plants.
    • Air ventilation.
    • Air Conditioning.
    • Hydraulic Equipment.

Service Activities

  • Cloward & Associates . Consulting Engineers U. S. A. 2696 N. University Are. Suite 290 Provo. UT 84604
  • Mega – Water U.S.A
  • Eco- Plan Consultation – Cairo – Egypt .
  • The American Consulting Office – Alex – Egypt.
  • ECG – Environmental Consulting Group, Alex. Egypt.
  • Dar- El- Khebra for Art. Consultations, Alex. Egypt.
  • OMRAN for Studies & Design , Alex. Egypt.
  • Maitime Research & Consultation Center.
  • Misr Consult Environmental & Infra Structure Studies. Cairo, Egypt.
  • Engineering Community Development Center, Faculty of Engineering, Alexandria University, Egypt.

Activities

List of Publications

  • Khalil,M.F., Elshorbagy, K.A., Kassab,S.Z.,and Abdelnaby,A.A. 1995 “Experimental Identification of Dynamic Characteristics of Externally Pressurized Conical Bearing”, Proceeding of Fifth International Conference of Fluid Mechanics , 2-5 Jan. Cairo, Egypt Vol. 3,pp.1031-1051.
  • Khalil,M.F., Elshorbagy, K.A., Kassab,S.Z.,and Abdelnaby,A.A. 1995 “Dynamic Performance of Hydrostatic Conical Bearings With Rotation”, Proceeding of Fifth International Conference of Fluid Mechanics , 2-5 Jan. Cairo, Egypt Vol. 3,pp.1081-1106.
  • Khalil,M.F., Elshorbagy, K.A., Kassab,S.Z.,and Abdelnaby,A.A. 1995 “Dynamic Stiffness and Damping Characteristics of Compensated Hydostatic conical Bearing “, Proceeding of Fifth International Conference of Fluid Mechanics , 2-5 Jan. Cairo, Egypt Vol. 3,pp.1197-1229.
  • Khalil,M.F., Elshorbagy, K.A., Kassab,S.Z.,and Abdelnaby,A.A. 1996 “Dynamic Performance of Non Constant Film Thickness Hydrostatic Conical Bearings”, Presnted at Socity of Engineering Science,33rd Annual Teaching Meeting, Oct 20-23 Tempe, Arizona, USAPaper FE3.
  • Khalil,M.F., Elshorbagy, K.A., Kassab,S.Z.,and Abdelnaby,A.A. 1997 “Dynamic Performance of Hydrostatic Conical Bearing Using Non- 4 Newtonian lubricant”, Proceeding of The 10th International Conference on Mechanical Power Engineering, Assiut University Assiut Egypt Dec.16-18 , pp. 427-444.
  • Abdelnaby, A.A., 2004 "Water and Power Saving By Recycling and Reuse of Domestic Water” 8th International Water Technology Conference, IWTC8, Alexandria, Egypt, 26-28 March 2004, Vol.1, pp. 289-303.
  • Kassab, S.Z., Abdelnaby, A.A., and Azouz, A., 2006, “Use of the Belt Skimmer to Recover Oil Following Accidental Spills- Laboratory Studies Defining Environmental Parameters", Int. J. Applied Engineering Research, Vol.1, No. 1, pp.119-134.
  • Kassab, S.Z., Abdelnaby, A.A., and Abdelbasier, E.I. 2006, “Performance of Multi-Layer Coil Pump”, Proceedings of 10th International Water Technology, IWTC10, Alexandria, Egypt, 23-25 March 2006, Vol. 2, pp. 431-445.
  • Hammoud, A.H. and Abdelnaby, A.A., 2006 "Slurry Jet Pump Performance Under Different Design and Operational parameters", WSEAS TRANSACTION ON FLUID MECHANICS Issue 5, Vol. 1, No. 1, pp.506-513. Also, proceeding of 4th IASME/ WSEAS Int.,Conf. on Fluid Mechanics and Aerodynamics, Agois Nikolaos, Crete Island, Greece, August 21- 23, 2006.
  • Kassab, S.Z., Abdelnaby, A.A., and Abdelbasier, E.I. 2006, “Performance of Conical Coil Pump”, Proceedings of 6th International Conference of Role of Engineering Towards a Better Environment, RETBE 06, Alexandria, Egypt, 16-18 Dec. 2006, pp. 1-15.
  • Kassab, S.Z., Abdelnaby, A.A., and Azouz, A. 2007, “Influence of the Operating Parameters on the Performance of Belt Skimmer”, Int. J. Applied Engineering Research, Vol.2, No. 1, pp.173-190.
  • Abdelnaby,A.A, et al. 2007 " Automatic Oil Skimmer ", Academe of Scientific Research and Technology, Arab Republic of Egypt, Ministry of State for Scientific Research, Patent application No. 2007060350 Patent No. 24619 Also, proceeding in 5th International Conference On Role of Engineering Towards a Better Environment, RETBE 04, Alexandria, Egypt, 11-13 December, 2004
  • Kassab, S.Z., Abdelnaby, A.A., and Abdelbasier, E.I. 2008, “Coil Pump Performance under variable Operating Conditions”, International Review of Mechanical Engineering, Vol. 2, No. 6. pp. 905-914. Also, proceeding of 9th International Water Technology Conference IWTC 2005 ", Vol.2, pp. 655-672. Sharm Al-Sheikh , Egypt, 17-20 March 2005 5
  • Khalil, M.F., Kassab, S.Z., Abdelnaby, A.A., and Azouz, A. 2009 "Parametric Performance Study of a Recovery Pumping System Handling Nile Water Hyacinth", European Journal of Scientific Research, Vol. 38, No. 1, pp. 81-95 Also proceeding in The 6th International Conference on Environmental Hydrology and 1st Symposium on Coastal and Port Engineering, Cairo, EGYPT, 28 – 30 September, 2009. Also, proceeding of Cairo 9th International Conference On Energy and Environment, Sharm El Sheikh, Egypt, 14-16 March, 2005
  • Khalil, M.F., Kassab, S.Z., Abdelnaby, A.A., and Azouz, A. 2010 "Performance of a Pumping System Handling Nile Water Hyacinth under Variable Operating Conditions", J. Int. Environmental Application & Science, Vol. 5, No. 1. pp. 99-112 also, proceeding in The 11th International Conference on Energy and Environment, Cairo, Egypt. 15-18 March 2009.
  • Khalil, M.F., Kassab, S.Z., Abdelnaby, A.A., and Azouz, A. 2010 "Influence of Pump Impeller Type on the Performance of a Recovery Pumping System Handling Nile Water Hyacinth", European Journal of Scientific Research, Vol. 41, No. 4, pp. 497-514. Also, proceeding in the 14th International Conference on Water Technology , 21-23 March 2010, Cairo, EGYPT.
  • Khalil, M.F., Kassab, S.Z., Abdelnaby, A.A., and Azouz, A. 2010 "Effectiveness of a Recovery Pumping System Handling Nile Water Hyacinth", American Journal of Scientific and Industrial Research, 2010, Vol. 1, No. 1, pp. 56-65. Also, proceeding in the 4th International Conference on Marine Engineering and Shipbuilding Technology: Present and Future, 10-11 Nov. 2009, Alexandria, EGYPT.
  • Khalil, M.F., Kassab, S.Z., Abdelnaby, A.A., and Azouz, A. 2010 "Recovery Pumping System Handling Water Hyacinth: Volume Reduction Criteria", American Journal of Scientific and Industrial Research, 2010, Vol. 1, No. 3, pp. 618-627. Also proceeding in The 10th International Conference of Role of Engineering towards a Better Environment, RETBE '10, Alexandria, Egypt, 20Dec. 2010
  • Mohamed F. Khalil, Sadek Z. Kassab, Ahmed A. Abdel Naby, and Ali Azouz “Performance Characteristics of a Centrifugal Pump Handling Soft Slurries “, VII International Conference on Environmental Hydrology, 25-27 Sept. 2012, Cairo, Egypt.
  • Mohamed F. Khalil, Sadek Z. Kassab, Ahmed A. Abdel Naby, and Ali Azouz Publishing a book titeled : “Performance of a Pumping System Handing Water Hyacinth“, Publisher: LAP LAMBERT ACADEMIC PUBLISHEING In a traemark of AV Akademikerlag GmbH&Co.KG, Deutschland/Germany 6 Email: info@lap-publishing.com ISBN: 978-3-659-30893-2
  • Mohamed F. Khalil, Sadek Z. Kassab, Ahmed A. Abdel Naby, and Ali Azouz “ Prediction of Centrifugal Pump Performance Characteristics Under variable Speed Conditions”, ICFD11, Eleventh International Conference of Fluid Dynamics, 19-21 December 2013 Alexandria, Egypt.
  • Mohamed F. Khalil, Sadek Z. Kassab, Ahmed A. Abdel Naby, and Ali Azouz “ Prediction of Centrifugal Pump Performance Characteristics Conveying Solid-Liquid Two Phase Flow” ICFD11, Eleventh International Conference of Fluid Dynamics, 19-21 December 2013 Alexandria, Egypt.

Conference Proceedings

  • 4th IASME/ WSEAS Int.,Conf. on Fluid Mechanics and Aerodynamics, Agois Nikolaos, Crete Island, Greece, August 21- 23, 2006 .
  • 6th International Conference of Role of Engineering Towards a Better Environment, RETBE 06, Alexandria, Egypt, 16-18 Dec. 2006, pp. 1-15.
  • 11th International Conference on Energy and Environment, Cairo, Egypt. 15-18 March 2009.
  • 6th International Conference on Environmental Hydrology and 1st Symposium on Coastal and Port Engineering, Cairo, EGYPT, 28 – 30 September, 2009.
  • 4th International Conference on Marine Engineering and Shipbuilding Technology: Present and Future, 10-11 Nov. 2009, Alexandria, EGYPT.
  • 14th International Conference on Water Technology , 21-23 March 2010, Cairo, EGYPT.
  • 10th International Conference of Role of Engineering towards a Better Environment, RETBE '10, Alexandria, Egypt, 20Dec. 2010.
  • “ Beirut Energy Forum “ , 13-14 September 2012.
  • “ Food Liquid Waste Management “ , 26-27 September 2012.
  • 11th International Conference of Fluid Dynamics”, 19-21 December 2013 Alexandria, Egypt.

    UNDER PUBLICATION

    • “Marine and Navy Revese Osmosis Units’Performance Enhacement Under different Enviomental Conditions”
    • ‘’Effect of Service Valve: Type, Opening and Position on Flow Meter Performance’’
    • ‘’Oil/Water Separator Performance Improvement Using a Combined Surface Air Stream and Bottom Air Injection’’
    • Centrifugal pump performance two phase flow “ Soild – Liquid” Performance.
    • Drum Skimmer Performance improvement using a Grooved Drum.
    • Waste Water Aeration Using Multi Turbo-Jets.
    • Water hammer Control using a Surge vessels

    M.sc Supervision

    • Water Hammer Enhancement Using Flywheel in Pumping Systems.
    • Water Quality Enhancement – Using Multi- Jet Aerator in Artificial Lakes.
    • Numerical and Experimental Thermal Analysis of Melting Problem During Presence of Natural Convection Currents.